From e9a73bbb3c14af340999f70146747787785f4fee Mon Sep 17 00:00:00 2001 From: Tim Redfern Date: Mon, 19 Dec 2011 18:20:33 +0000 Subject: initial commit --- timer1/Makefile | 152 +++++++++++++ timer1/burn | 1 + timer1/uart.c | 651 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ timer1/uart.c.map | 355 +++++++++++++++++++++++++++++ timer1/uart.h | 194 ++++++++++++++++ timer1/uart.o | Bin 0 -> 7852 bytes 6 files changed, 1353 insertions(+) create mode 100644 timer1/Makefile create mode 100755 timer1/burn create mode 100644 timer1/uart.c create mode 100644 timer1/uart.c.map create mode 100644 timer1/uart.h create mode 100644 timer1/uart.o (limited to 'timer1') diff --git a/timer1/Makefile b/timer1/Makefile new file mode 100644 index 0000000..9b5504e --- /dev/null +++ b/timer1/Makefile @@ -0,0 +1,152 @@ +PRG = $(wildcard *.c) +OBJ = $(PRG:.c=.o) +#MCU_TARGET = at90s2313 +#MCU_TARGET = at90s2333 +#MCU_TARGET = at90s4414 +#MCU_TARGET = at90s4433 +#MCU_TARGET = at90s4434 +#MCU_TARGET = at90s8515 +#MCU_TARGET = at90s8535 +#MCU_TARGET = atmega128 +#MCU_TARGET = atmega1280 +#MCU_TARGET = atmega1281 +#MCU_TARGET = atmega1284p +#MCU_TARGET = atmega16 +#MCU_TARGET = atmega163 +#MCU_TARGET = atmega164p +#MCU_TARGET = atmega165 +#MCU_TARGET = atmega165p +#MCU_TARGET = atmega168 +MCU_TARGET = atmega328p +#MCU_TARGET = atmega169 +#MCU_TARGET = atmega169p +#MCU_TARGET = atmega2560 +#MCU_TARGET = atmega2561 +#MCU_TARGET = atmega32 +#MCU_TARGET = atmega324p +#MCU_TARGET = atmega325 +#MCU_TARGET = atmega3250 +#MCU_TARGET = atmega329 +#MCU_TARGET = atmega3290 +#MCU_TARGET = atmega48 +#MCU_TARGET = atmega64 +#MCU_TARGET = atmega640 +#MCU_TARGET = atmega644 +#MCU_TARGET = atmega644p +#MCU_TARGET = atmega645 +#MCU_TARGET = atmega6450 +#MCU_TARGET = atmega649 +#MCU_TARGET = atmega6490 +#MCU_TARGET = atmega8 +#MCU_TARGET = atmega8515 +#MCU_TARGET = atmega8535 +#MCU_TARGET = atmega88 +#MCU_TARGET = attiny2313 +#MCU_TARGET = attiny24 +#MCU_TARGET = attiny25 +#MCU_TARGET = attiny26 +#MCU_TARGET = attiny261 +#MCU_TARGET = attiny44 +#MCU_TARGET = attiny45 +#MCU_TARGET = attiny461 +#MCU_TARGET = attiny84 +#MCU_TARGET = attiny85 +#MCU_TARGET = attiny861 +OPTIMIZE = -O2 + +DEFS = +LIBS = + +# You should not have to change anything below here. + +CC = avr-gcc +AVRDUDE = avrdude +AVRDUDE_FLAGS = -p m328p -c arduino -P /dev/ttyUSB0 -b 57600 -F +AVRDUDE_WRITE_FLASH = -u -U flash:w:timer1.hex + + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) $(DEFS) -std=c99 +override LDFLAGS = -Wl,-Map,$(PRG).map + +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump + +all: $(PRG).elf lst text eeprom + +$(PRG).elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +# dependency: +#*.o: *.c + +clean: + rm -rf *.o $(PRG).elf *.eps *.png *.pdf *.bak + rm -rf *.lst *.map $(EXTRA_CLEAN_FILES) + +#burn: +# avrdude -p m328p -c arduino -P /dev/ttyUSB0 -b 57600 -F -u -U flash:w:timer1.hex + +lst: $(PRG).lst + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +# Rules for building the .text rom images + +text: hex bin srec + +hex: $(PRG).hex +bin: $(PRG).bin +srec: $(PRG).srec + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + +# Rules for building the .eeprom rom images + +eeprom: ehex ebin esrec + +ehex: $(PRG)_eeprom.hex +ebin: $(PRG)_eeprom.bin +esrec: $(PRG)_eeprom.srec + +%_eeprom.hex: %.elf + $(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O ihex $< $@ \ + || { echo empty $@ not generated; exit 0; } + +%_eeprom.srec: %.elf + $(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O srec $< $@ \ + || { echo empty $@ not generated; exit 0; } + +%_eeprom.bin: %.elf + $(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O binary $< $@ \ + || { echo empty $@ not generated; exit 0; } + +# Every thing below here is used by avr-libc's build system and can be ignored +# by the casual user. + +FIG2DEV = fig2dev +EXTRA_CLEAN_FILES = *.hex *.bin *.srec + +dox: eps png pdf + +eps: $(PRG).eps +png: $(PRG).png +pdf: $(PRG).pdf + +%.eps: %.fig + $(FIG2DEV) -L eps $< $@ + +%.pdf: %.fig + $(FIG2DEV) -L pdf $< $@ + +%.png: %.fig + $(FIG2DEV) -L png $< $@ diff --git a/timer1/burn b/timer1/burn new file mode 100755 index 0000000..04da938 --- /dev/null +++ b/timer1/burn @@ -0,0 +1 @@ +avrdude -p m328p -c arduino -P /dev/ttyUSB0 -b 57600 -F -u -U flash:w:timer1.hex diff --git a/timer1/uart.c b/timer1/uart.c new file mode 100644 index 0000000..6034070 --- /dev/null +++ b/timer1/uart.c @@ -0,0 +1,651 @@ +/************************************************************************* +Title: Interrupt UART library with receive/transmit circular buffers +Author: Peter Fleury http://jump.to/fleury +File: $Id: uart.c,v 1.6.2.2 2009/11/29 08:56:12 Peter Exp $ +Software: AVR-GCC 4.1, AVR Libc 1.4.6 or higher +Hardware: any AVR with built-in UART, +License: GNU General Public License + +DESCRIPTION: + An interrupt is generated when the UART has finished transmitting or + receiving a byte. The interrupt handling routines use circular buffers + for buffering received and transmitted data. + + The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE variables define + the buffer size in bytes. Note that these variables must be a + power of 2. + +USAGE: + Refere to the header file uart.h for a description of the routines. + See also example test_uart.c. + +NOTES: + Based on Atmel Application Note AVR306 + +LICENSE: + Copyright (C) 2006 Peter Fleury + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + +*************************************************************************/ +#include +#include +#include +#include "uart.h" + + +/* + * constants and macros + */ + +/* size of RX/TX buffers */ +#define UART_RX_BUFFER_MASK ( UART_RX_BUFFER_SIZE - 1) +#define UART_TX_BUFFER_MASK ( UART_TX_BUFFER_SIZE - 1) + +#if ( UART_RX_BUFFER_SIZE & UART_RX_BUFFER_MASK ) +#error RX buffer size is not a power of 2 +#endif +#if ( UART_TX_BUFFER_SIZE & UART_TX_BUFFER_MASK ) +#error TX buffer size is not a power of 2 +#endif + +#if defined(__AVR_AT90S2313__) \ + || defined(__AVR_AT90S4414__) || defined(__AVR_AT90S4434__) \ + || defined(__AVR_AT90S8515__) || defined(__AVR_AT90S8535__) \ + || defined(__AVR_ATmega103__) + /* old AVR classic or ATmega103 with one UART */ + #define AT90_UART + #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA + #define UART0_STATUS USR + #define UART0_CONTROL UCR + #define UART0_DATA UDR + #define UART0_UDRIE UDRIE +#elif defined(__AVR_AT90S2333__) || defined(__AVR_AT90S4433__) + /* old AVR classic with one UART */ + #define AT90_UART + #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA + #define UART0_STATUS UCSRA + #define UART0_CONTROL UCSRB + #define UART0_DATA UDR + #define UART0_UDRIE UDRIE +#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \ + || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega8535__) \ + || defined(__AVR_ATmega323__) + /* ATmega with one USART */ + #define ATMEGA_USART + #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA + #define UART0_STATUS UCSRA + #define UART0_CONTROL UCSRB + #define UART0_DATA UDR + #define UART0_UDRIE UDRIE +#elif defined(__AVR_ATmega163__) + /* ATmega163 with one UART */ + #define ATMEGA_UART + #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA + #define UART0_STATUS UCSRA + #define UART0_CONTROL UCSRB + #define UART0_DATA UDR + #define UART0_UDRIE UDRIE +#elif defined(__AVR_ATmega162__) + /* ATmega with two USART */ + #define ATMEGA_USART0 + #define ATMEGA_USART1 + #define UART0_RECEIVE_INTERRUPT SIG_USART0_RECV + #define UART1_RECEIVE_INTERRUPT SIG_USART1_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_USART0_DATA + #define UART1_TRANSMIT_INTERRUPT SIG_USART1_DATA + #define UART0_STATUS UCSR0A + #define UART0_CONTROL UCSR0B + #define UART0_DATA UDR0 + #define UART0_UDRIE UDRIE0 + #define UART1_STATUS UCSR1A + #define UART1_CONTROL UCSR1B + #define UART1_DATA UDR1 + #define UART1_UDRIE UDRIE1 +#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) + /* ATmega with two USART */ + #define ATMEGA_USART0 + #define ATMEGA_USART1 + #define UART0_RECEIVE_INTERRUPT SIG_UART0_RECV + #define UART1_RECEIVE_INTERRUPT SIG_UART1_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_UART0_DATA + #define UART1_TRANSMIT_INTERRUPT SIG_UART1_DATA + #define UART0_STATUS UCSR0A + #define UART0_CONTROL UCSR0B + #define UART0_DATA UDR0 + #define UART0_UDRIE UDRIE0 + #define UART1_STATUS UCSR1A + #define UART1_CONTROL UCSR1B + #define UART1_DATA UDR1 + #define UART1_UDRIE UDRIE1 +#elif defined(__AVR_ATmega161__) + /* ATmega with UART */ + #error "AVR ATmega161 currently not supported by this libaray !" +#elif defined(__AVR_ATmega169__) + /* ATmega with one USART */ + #define ATMEGA_USART + #define UART0_RECEIVE_INTERRUPT SIG_USART_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_USART_DATA + #define UART0_STATUS UCSRA + #define UART0_CONTROL UCSRB + #define UART0_DATA UDR + #define UART0_UDRIE UDRIE +#elif defined(__AVR_ATmega48__) ||defined(__AVR_ATmega88__) || defined(__AVR_ATmega168__) || defined(__AVR_ATmega48P__) || defined(__AVR_ATmega88P__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) + /* ATmega with one USART */ + #define ATMEGA_USART0 + #define UART0_RECEIVE_INTERRUPT SIG_USART_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_USART_DATA + #define UART0_STATUS UCSR0A + #define UART0_CONTROL UCSR0B + #define UART0_DATA UDR0 + #define UART0_UDRIE UDRIE0 +#elif defined(__AVR_ATtiny2313__) + #define ATMEGA_USART + #define UART0_RECEIVE_INTERRUPT SIG_USART0_RX + #define UART0_TRANSMIT_INTERRUPT SIG_USART0_UDRE + #define UART0_STATUS UCSRA + #define UART0_CONTROL UCSRB + #define UART0_DATA UDR + #define UART0_UDRIE UDRIE +#elif defined(__AVR_ATmega329__) ||defined(__AVR_ATmega3290__) ||\ + defined(__AVR_ATmega649__) ||defined(__AVR_ATmega6490__) ||\ + defined(__AVR_ATmega325__) ||defined(__AVR_ATmega3250__) ||\ + defined(__AVR_ATmega645__) ||defined(__AVR_ATmega6450__) + /* ATmega with one USART */ + #define ATMEGA_USART0 + #define UART0_RECEIVE_INTERRUPT SIG_UART_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_UART_DATA + #define UART0_STATUS UCSR0A + #define UART0_CONTROL UCSR0B + #define UART0_DATA UDR0 + #define UART0_UDRIE UDRIE0 +#elif defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega640__) +/* ATmega with two USART */ + #define ATMEGA_USART0 + #define ATMEGA_USART1 + #define UART0_RECEIVE_INTERRUPT SIG_USART0_RECV + #define UART1_RECEIVE_INTERRUPT SIG_USART1_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_USART0_DATA + #define UART1_TRANSMIT_INTERRUPT SIG_USART1_DATA + #define UART0_STATUS UCSR0A + #define UART0_CONTROL UCSR0B + #define UART0_DATA UDR0 + #define UART0_UDRIE UDRIE0 + #define UART1_STATUS UCSR1A + #define UART1_CONTROL UCSR1B + #define UART1_DATA UDR1 + #define UART1_UDRIE UDRIE1 +#elif defined(__AVR_ATmega644__) + /* ATmega with one USART */ + #define ATMEGA_USART0 + #define UART0_RECEIVE_INTERRUPT SIG_USART_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_USART_DATA + #define UART0_STATUS UCSR0A + #define UART0_CONTROL UCSR0B + #define UART0_DATA UDR0 + #define UART0_UDRIE UDRIE0 +#elif defined(__AVR_ATmega164P__) || defined(__AVR_ATmega324P__) || defined(__AVR_ATmega644P__) + /* ATmega with two USART */ + #define ATMEGA_USART0 + #define ATMEGA_USART1 + #define UART0_RECEIVE_INTERRUPT SIG_USART_RECV + #define UART1_RECEIVE_INTERRUPT SIG_USART1_RECV + #define UART0_TRANSMIT_INTERRUPT SIG_USART_DATA + #define UART1_TRANSMIT_INTERRUPT SIG_USART1_DATA + #define UART0_STATUS UCSR0A + #define UART0_CONTROL UCSR0B + #define UART0_DATA UDR0 + #define UART0_UDRIE UDRIE0 + #define UART1_STATUS UCSR1A + #define UART1_CONTROL UCSR1B + #define UART1_DATA UDR1 + #define UART1_UDRIE UDRIE1 +#else + #error "no UART definition for MCU available" +#endif + + +/* + * module global variables + */ +static volatile unsigned char UART_TxBuf[UART_TX_BUFFER_SIZE]; +static volatile unsigned char UART_RxBuf[UART_RX_BUFFER_SIZE]; +static volatile unsigned char UART_TxHead; +static volatile unsigned char UART_TxTail; +static volatile unsigned char UART_RxHead; +static volatile unsigned char UART_RxTail; +static volatile unsigned char UART_LastRxError; + +#if defined( ATMEGA_USART1 ) +static volatile unsigned char UART1_TxBuf[UART_TX_BUFFER_SIZE]; +static volatile unsigned char UART1_RxBuf[UART_RX_BUFFER_SIZE]; +static volatile unsigned char UART1_TxHead; +static volatile unsigned char UART1_TxTail; +static volatile unsigned char UART1_RxHead; +static volatile unsigned char UART1_RxTail; +static volatile unsigned char UART1_LastRxError; +#endif + + + +SIGNAL(UART0_RECEIVE_INTERRUPT) +/************************************************************************* +Function: UART Receive Complete interrupt +Purpose: called when the UART has received a character +**************************************************************************/ +{ + unsigned char tmphead; + unsigned char data; + unsigned char usr; + unsigned char lastRxError; + + + /* read UART status register and UART data register */ + usr = UART0_STATUS; + data = UART0_DATA; + + /* */ +#if defined( AT90_UART ) + lastRxError = (usr & (_BV(FE)|_BV(DOR)) ); +#elif defined( ATMEGA_USART ) + lastRxError = (usr & (_BV(FE)|_BV(DOR)) ); +#elif defined( ATMEGA_USART0 ) + lastRxError = (usr & (_BV(FE0)|_BV(DOR0)) ); +#elif defined ( ATMEGA_UART ) + lastRxError = (usr & (_BV(FE)|_BV(DOR)) ); +#endif + + /* calculate buffer index */ + tmphead = ( UART_RxHead + 1) & UART_RX_BUFFER_MASK; + + if ( tmphead == UART_RxTail ) { + /* error: receive buffer overflow */ + lastRxError = UART_BUFFER_OVERFLOW >> 8; + }else{ + /* store new index */ + UART_RxHead = tmphead; + /* store received data in buffer */ + UART_RxBuf[tmphead] = data; + } + UART_LastRxError = lastRxError; +} + + +SIGNAL(UART0_TRANSMIT_INTERRUPT) +/************************************************************************* +Function: UART Data Register Empty interrupt +Purpose: called when the UART is ready to transmit the next byte +**************************************************************************/ +{ + unsigned char tmptail; + + + if ( UART_TxHead != UART_TxTail) { + /* calculate and store new buffer index */ + tmptail = (UART_TxTail + 1) & UART_TX_BUFFER_MASK; + UART_TxTail = tmptail; + /* get one byte from buffer and write it to UART */ + UART0_DATA = UART_TxBuf[tmptail]; /* start transmission */ + }else{ + /* tx buffer empty, disable UDRE interrupt */ + UART0_CONTROL &= ~_BV(UART0_UDRIE); + } +} + + +/************************************************************************* +Function: uart_init() +Purpose: initialize UART and set baudrate +Input: baudrate using macro UART_BAUD_SELECT() +Returns: none +**************************************************************************/ +void uart_init(unsigned int baudrate) +{ + UART_TxHead = 0; + UART_TxTail = 0; + UART_RxHead = 0; + UART_RxTail = 0; + +#if defined( AT90_UART ) + /* set baud rate */ + UBRR = (unsigned char)baudrate; + + /* enable UART receiver and transmmitter and receive complete interrupt */ + UART0_CONTROL = _BV(RXCIE)|_BV(RXEN)|_BV(TXEN); + +#elif defined (ATMEGA_USART) + /* Set baud rate */ + if ( baudrate & 0x8000 ) + { + UART0_STATUS = (1<>8); + UBRRL = (unsigned char) baudrate; + + /* Enable USART receiver and transmitter and receive complete interrupt */ + UART0_CONTROL = _BV(RXCIE)|(1<>8); + UBRR0L = (unsigned char) baudrate; + + /* Enable USART receiver and transmitter and receive complete interrupt */ + UART0_CONTROL = _BV(RXCIE0)|(1<>8); + UBRR = (unsigned char) baudrate; + + /* Enable UART receiver and transmitter and receive complete interrupt */ + UART0_CONTROL = _BV(RXCIE)|(1<> 8; + }else{ + /* store new index */ + UART1_RxHead = tmphead; + /* store received data in buffer */ + UART1_RxBuf[tmphead] = data; + } + UART1_LastRxError = lastRxError; +} + + +SIGNAL(UART1_TRANSMIT_INTERRUPT) +/************************************************************************* +Function: UART1 Data Register Empty interrupt +Purpose: called when the UART1 is ready to transmit the next byte +**************************************************************************/ +{ + unsigned char tmptail; + + + if ( UART1_TxHead != UART1_TxTail) { + /* calculate and store new buffer index */ + tmptail = (UART1_TxTail + 1) & UART_TX_BUFFER_MASK; + UART1_TxTail = tmptail; + /* get one byte from buffer and write it to UART */ + UART1_DATA = UART1_TxBuf[tmptail]; /* start transmission */ + }else{ + /* tx buffer empty, disable UDRE interrupt */ + UART1_CONTROL &= ~_BV(UART1_UDRIE); + } +} + + +/************************************************************************* +Function: uart1_init() +Purpose: initialize UART1 and set baudrate +Input: baudrate using macro UART_BAUD_SELECT() +Returns: none +**************************************************************************/ +void uart1_init(unsigned int baudrate) +{ + UART1_TxHead = 0; + UART1_TxTail = 0; + UART1_RxHead = 0; + UART1_RxTail = 0; + + + /* Set baud rate */ + if ( baudrate & 0x8000 ) + { + UART1_STATUS = (1<>8); + UBRR1L = (unsigned char) baudrate; + + /* Enable USART receiver and transmitter and receive complete interrupt */ + UART1_CONTROL = _BV(RXCIE1)|(1< http://jump.to/fleury +File: $Id: uart.h,v 1.8.2.1 2007/07/01 11:14:38 peter Exp $ +Software: AVR-GCC 4.1, AVR Libc 1.4 +Hardware: any AVR with built-in UART, tested on AT90S8515 & ATmega8 at 4 Mhz +License: GNU General Public License +Usage: see Doxygen manual + +LICENSE: + Copyright (C) 2006 Peter Fleury + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + +************************************************************************/ + +/** + * @defgroup pfleury_uart UART Library + * @code #include @endcode + * + * @brief Interrupt UART library using the built-in UART with transmit and receive circular buffers. + * + * This library can be used to transmit and receive data through the built in UART. + * + * An interrupt is generated when the UART has finished transmitting or + * receiving a byte. The interrupt handling routines use circular buffers + * for buffering received and transmitted data. + * + * The UART_RX_BUFFER_SIZE and UART_TX_BUFFER_SIZE constants define + * the size of the circular buffers in bytes. Note that these constants must be a power of 2. + * You may need to adapt this constants to your target and your application by adding + * CDEFS += -DUART_RX_BUFFER_SIZE=nn -DUART_RX_BUFFER_SIZE=nn to your Makefile. + * + * @note Based on Atmel Application Note AVR306 + * @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury + */ + +/**@{*/ + + +#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 +#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" +#endif + + +/* +** constants and macros +*/ + +/** @brief UART Baudrate Expression + * @param xtalcpu system clock in Mhz, e.g. 4000000L for 4Mhz + * @param baudrate baudrate in bps, e.g. 1200, 2400, 9600 + */ +#define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu)/((baudRate)*16l)-1) + +/** @brief UART Baudrate Expression for ATmega double speed mode + * @param xtalcpu system clock in Mhz, e.g. 4000000L for 4Mhz + * @param baudrate baudrate in bps, e.g. 1200, 2400, 9600 + */ +#define UART_BAUD_SELECT_DOUBLE_SPEED(baudRate,xtalCpu) (((xtalCpu)/((baudRate)*8l)-1)|0x8000) + + +/** Size of the circular receive buffer, must be power of 2 */ +#ifndef UART_RX_BUFFER_SIZE +#define UART_RX_BUFFER_SIZE 32 +#endif +/** Size of the circular transmit buffer, must be power of 2 */ +#ifndef UART_TX_BUFFER_SIZE +#define UART_TX_BUFFER_SIZE 32 +#endif + +/* test if the size of the circular buffers fits into SRAM */ +#if ( (UART_RX_BUFFER_SIZE+UART_TX_BUFFER_SIZE) >= (RAMEND-0x60 ) ) +#error "size of UART_RX_BUFFER_SIZE + UART_TX_BUFFER_SIZE larger than size of SRAM" +#endif + +/* +** high byte error return code of uart_getc() +*/ +#define UART_FRAME_ERROR 0x0800 /* Framing Error by UART */ +#define UART_OVERRUN_ERROR 0x0400 /* Overrun condition by UART */ +#define UART_BUFFER_OVERFLOW 0x0200 /* receive ringbuffer overflow */ +#define UART_NO_DATA 0x0100 /* no receive data available */ + + +/* +** function prototypes +*/ + +/** + @brief Initialize UART and set baudrate + @param baudrate Specify baudrate using macro UART_BAUD_SELECT() + @return none +*/ +extern void uart_init(unsigned int baudrate); + + +/** + * @brief Get received byte from ringbuffer + * + * Returns in the lower byte the received character and in the + * higher byte the last receive error. + * UART_NO_DATA is returned when no data is available. + * + * @param void + * @return lower byte: received byte from ringbuffer + * @return higher byte: last receive status + * - \b 0 successfully received data from UART + * - \b UART_NO_DATA + *
no receive data available + * - \b UART_BUFFER_OVERFLOW + *
Receive ringbuffer overflow. + * We are not reading the receive buffer fast enough, + * one or more received character have been dropped + * - \b UART_OVERRUN_ERROR + *
Overrun condition by UART. + * A character already present in the UART UDR register was + * not read by the interrupt handler before the next character arrived, + * one or more received characters have been dropped. + * - \b UART_FRAME_ERROR + *
Framing Error by UART + */ +extern unsigned int uart_getc(void); + + +/** + * @brief Put byte to ringbuffer for transmitting via UART + * @param data byte to be transmitted + * @return none + */ +extern void uart_putc(unsigned char data); + + +/** + * @brief Put string to ringbuffer for transmitting via UART + * + * The string is buffered by the uart library in a circular buffer + * and one character at a time is transmitted to the UART using interrupts. + * Blocks if it can not write the whole string into the circular buffer. + * + * @param s string to be transmitted + * @return none + */ +extern void uart_puts(const char *s ); + + +/** + * @brief Put string from program memory to ringbuffer for transmitting via UART. + * + * The string is buffered by the uart library in a circular buffer + * and one character at a time is transmitted to the UART using interrupts. + * Blocks if it can not write the whole string into the circular buffer. + * + * @param s program memory string to be transmitted + * @return none + * @see uart_puts_P + */ +extern void uart_puts_p(const char *s ); + +/** + * @brief Macro to automatically put a string constant into program memory + */ +#define uart_puts_P(__s) uart_puts_p(PSTR(__s)) + + + +/** @brief Initialize USART1 (only available on selected ATmegas) @see uart_init */ +extern void uart1_init(unsigned int baudrate); +/** @brief Get received byte of USART1 from ringbuffer. (only available on selected ATmega) @see uart_getc */ +extern unsigned int uart1_getc(void); +/** @brief Put byte to ringbuffer for transmitting via USART1 (only available on selected ATmega) @see uart_putc */ +extern void uart1_putc(unsigned char data); +/** @brief Put string to ringbuffer for transmitting via USART1 (only available on selected ATmega) @see uart_puts */ +extern void uart1_puts(const char *s ); +/** @brief Put string from program memory to ringbuffer for transmitting via USART1 (only available on selected ATmega) @see uart_puts_p */ +extern void uart1_puts_p(const char *s ); +/** @brief Macro to automatically put a string constant into program memory */ +#define uart1_puts_P(__s) uart1_puts_p(PSTR(__s)) + +/**@}*/ + + +#endif // UART_H + diff --git a/timer1/uart.o b/timer1/uart.o new file mode 100644 index 0000000..d2cebd3 Binary files /dev/null and b/timer1/uart.o differ -- cgit v1.2.3