6 files changed, 346 insertions, 0 deletions
diff --git a/polyTest/Makefile b/polyTest/Makefile
new file mode 100644
index 0000000..177e172
--- /dev/null
+++ b/polyTest/Makefile
@@ -0,0 +1,13 @@
+# Attempt to load a config.make file.
+# If none is found, project defaults in config.project.make will be used.
+ifneq ($(wildcard config.make),)
+	include config.make
+endif
+
+# make sure the the OF_ROOT location is defined
+ifndef OF_ROOT
+	OF_ROOT=$(realpath ../../..)
+endif
+
+# call the project makefile!
+include $(OF_ROOT)/libs/openFrameworksCompiled/project/makefileCommon/compile.project.mk
diff --git a/polyTest/addons.make b/polyTest/addons.make
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/polyTest/addons.make
diff --git a/polyTest/config.make b/polyTest/config.make
new file mode 100644
index 0000000..a2f4f86
--- /dev/null
+++ b/polyTest/config.make
@@ -0,0 +1,142 @@
+################################################################################
+# CONFIGURE PROJECT MAKEFILE (optional)
+#   This file is where we make project specific configurations.
+################################################################################
+
+################################################################################
+# OF ROOT
+#   The location of your root openFrameworks installation
+#       (default) OF_ROOT = ../../.. 
+################################################################################
+OF_ROOT = ../../openFrameworks
+
+################################################################################
+# PROJECT ROOT
+#   The location of the project - a starting place for searching for files
+#       (default) PROJECT_ROOT = . (this directory)
+#    
+################################################################################
+# PROJECT_ROOT = .
+
+################################################################################
+# PROJECT SPECIFIC CHECKS
+#   This is a project defined section to create internal makefile flags to 
+#   conditionally enable or disable the addition of various features within 
+#   this makefile.  For instance, if you want to make changes based on whether
+#   GTK is installed, one might test that here and create a variable to check. 
+################################################################################
+# None
+
+################################################################################
+# PROJECT EXTERNAL SOURCE PATHS
+#   These are fully qualified paths that are not within the PROJECT_ROOT folder.
+#   Like source folders in the PROJECT_ROOT, these paths are subject to 
+#   exlclusion via the PROJECT_EXLCUSIONS list.
+#
+#     (default) PROJECT_EXTERNAL_SOURCE_PATHS = (blank) 
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_EXTERNAL_SOURCE_PATHS = 
+
+################################################################################
+# PROJECT EXCLUSIONS
+#   These makefiles assume that all folders in your current project directory 
+#   and any listed in the PROJECT_EXTERNAL_SOURCH_PATHS are are valid locations
+#   to look for source code. The any folders or files that match any of the 
+#   items in the PROJECT_EXCLUSIONS list below will be ignored.
+#
+#   Each item in the PROJECT_EXCLUSIONS list will be treated as a complete 
+#   string unless teh user adds a wildcard (%) operator to match subdirectories.
+#   GNU make only allows one wildcard for matching.  The second wildcard (%) is
+#   treated literally.
+#
+#      (default) PROJECT_EXCLUSIONS = (blank)
+#
+#		Will automatically exclude the following:
+#
+#			$(PROJECT_ROOT)/bin%
+#			$(PROJECT_ROOT)/obj%
+#			$(PROJECT_ROOT)/%.xcodeproj
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_EXCLUSIONS =
+
+################################################################################
+# PROJECT LINKER FLAGS
+#	These flags will be sent to the linker when compiling the executable.
+#
+#		(default) PROJECT_LDFLAGS = -Wl,-rpath=./libs
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+
+# Currently, shared libraries that are needed are copied to the 
+# $(PROJECT_ROOT)/bin/libs directory.  The following LDFLAGS tell the linker to
+# add a runtime path to search for those shared libraries, since they aren't 
+# incorporated directly into the final executable application binary.
+# TODO: should this be a default setting?
+# PROJECT_LDFLAGS=-Wl,-rpath=./libs
+
+################################################################################
+# PROJECT DEFINES
+#   Create a space-delimited list of DEFINES. The list will be converted into 
+#   CFLAGS with the "-D" flag later in the makefile.
+#
+#		(default) PROJECT_DEFINES = (blank)
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_DEFINES = 
+
+################################################################################
+# PROJECT CFLAGS
+#   This is a list of fully qualified CFLAGS required when compiling for this 
+#   project.  These CFLAGS will be used IN ADDITION TO the PLATFORM_CFLAGS 
+#   defined in your platform specific core configuration files. These flags are
+#   presented to the compiler BEFORE the PROJECT_OPTIMIZATION_CFLAGS below. 
+#
+#		(default) PROJECT_CFLAGS = (blank)
+#
+#   Note: Before adding PROJECT_CFLAGS, note that the PLATFORM_CFLAGS defined in 
+#   your platform specific configuration file will be applied by default and 
+#   further flags here may not be needed.
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_CFLAGS = 
+
+################################################################################
+# PROJECT OPTIMIZATION CFLAGS
+#   These are lists of CFLAGS that are target-specific.  While any flags could 
+#   be conditionally added, they are usually limited to optimization flags. 
+#   These flags are added BEFORE the PROJECT_CFLAGS.
+#
+#   PROJECT_OPTIMIZATION_CFLAGS_RELEASE flags are only applied to RELEASE targets.
+#
+#		(default) PROJECT_OPTIMIZATION_CFLAGS_RELEASE = (blank)
+#
+#   PROJECT_OPTIMIZATION_CFLAGS_DEBUG flags are only applied to DEBUG targets.
+#
+#		(default) PROJECT_OPTIMIZATION_CFLAGS_DEBUG = (blank)
+#
+#   Note: Before adding PROJECT_OPTIMIZATION_CFLAGS, please note that the 
+#   PLATFORM_OPTIMIZATION_CFLAGS defined in your platform specific configuration 
+#   file will be applied by default and further optimization flags here may not 
+#   be needed.
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_OPTIMIZATION_CFLAGS_RELEASE = 
+# PROJECT_OPTIMIZATION_CFLAGS_DEBUG = 
+
+################################################################################
+# PROJECT COMPILERS
+#   Custom compilers can be set for CC and CXX
+#		(default) PROJECT_CXX = (blank)
+#		(default) PROJECT_CC = (blank)
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_CXX = 
+# PROJECT_CC = 
diff --git a/polyTest/src/main.cpp b/polyTest/src/main.cpp
new file mode 100644
index 0000000..02b6b14
--- /dev/null
+++ b/polyTest/src/main.cpp
@@ -0,0 +1,24 @@
+#include "ofMain.h"
+#include "ofApp.h"
+
+
+//========================================================================
+int main(int argc, char *argv[]){
+
+
+	ofGLFWWindowSettings settings;
+
+
+	settings.width = 1200;
+	settings.height = 900;
+
+	//1200 = 13.2° = 42898 pts theoretical
+
+	shared_ptr<ofAppBaseWindow> mainWindow = ofCreateWindow(settings);
+
+	shared_ptr<ofApp> mainApp(new ofApp);
+	
+	ofRunApp(mainWindow, mainApp);
+	ofRunMainLoop();
+}
+	
+\ No newline at end of file
diff --git a/polyTest/src/ofApp.cpp b/polyTest/src/ofApp.cpp
new file mode 100644
index 0000000..1553666
--- /dev/null
+++ b/polyTest/src/ofApp.cpp
@@ -0,0 +1,132 @@
+#include "ofApp.h"
+#include "glew.h"
+
+
+//--------------------------------------------------------------
+void ofApp::setup(){
+
+}
+
+
+
+//--------------------------------------------------------------
+void ofApp::update(){
+
+	
+}
+
+ofPolyline ofApp::polyLineTransform(const ofPolyline& poly, ofMatrix4x4 xform){
+	ofPolyline tempPoly;
+	for (auto& p:poly){
+		tempPoly.addVertex(ofVec3f(p)*xform);
+	}
+	return tempPoly;
+}
+
+ofPolyline makePolygon(int num,float diam){
+	ofPolyline poly;
+	float step=PI*2/num;
+	for (int i=0;i<=num;i++){
+		poly.addVertex(cos(step*i)*diam,sin(step*i)*diam);
+	}
+	return poly;
+}
+
+void drawPoly(ofPolyline poly,float x,float y){
+	glPushMatrix();
+	ofTranslate(x,y);
+	poly.draw();
+	for (int i=0;i<poly.size();i++){
+		ofDrawBitmapString(poly.getDegreesAtIndex(i),poly[i].x+10,poly[i].y+10,0);
+	}
+	glPopMatrix();
+}
+
+
+//--------------------------------------------------------------	
+void ofApp::draw(){
+	ofBackground(0,0,0);
+	ofSetColor(255,255,255);
+
+	ofTranslate(ofGetWidth()/2,ofGetHeight()/2);
+	ofRotate(0,0,1,ofGetElapsedTimef()*50);
+	drawPoly(makePolygon(4,200),200,200);
+	drawPoly(makePolygon(5,200),-200,200);
+	drawPoly(makePolygon(6,200),-200,-200);
+
+	
+
+
+}
+
+
+//--------------------------------------------------------------
+void ofApp::exit() {
+	
+}
+
+
+
+//--------------------------------------------------------------
+void ofApp::keyPressed(ofKeyEventArgs &args){
+
+
+
+}
+
+
+//--------------------------------------------------------------
+void ofApp::keyReleased(int key){
+
+	
+}
+
+//--------------------------------------------------------------
+void ofApp::mouseMoved(int x, int y ){
+
+}
+
+//--------------------------------------------------------------
+void ofApp::mouseDragged(int x, int y, int button){
+	
+}
+
+//--------------------------------------------------------------
+void ofApp::mousePressed(int x, int y, int button){
+	
+}
+
+//--------------------------------------------------------------
+void ofApp::mouseReleased(int x, int y, int button){
+
+}
+
+//--------------------------------------------------------------
+void ofApp::mouseEntered(int x, int y){
+
+}
+
+//--------------------------------------------------------------
+void ofApp::mouseExited(int x, int y){
+
+}
+
+//--------------------------------------------------------------
+void ofApp::windowResized(int w, int h){
+
+}
+
+void ofApp::outputWindowResized(ofResizeEventArgs &resizeargs){
+
+}
+
+//--------------------------------------------------------------
+void ofApp::gotMessage(ofMessage msg){
+
+}
+
+//--------------------------------------------------------------
+void ofApp::dragEvent(ofDragInfo dragInfo){ 
+
+	
+}
diff --git a/polyTest/src/ofApp.h b/polyTest/src/ofApp.h
new file mode 100644
index 0000000..316649c
--- /dev/null
+++ b/polyTest/src/ofApp.h
@@ -0,0 +1,35 @@
+#pragma once
+
+#include "ofMain.h"
+
+
+
+class ofApp : public ofBaseApp{
+
+	public:
+		void setup();
+		void update();
+		void updateOutput(ofEventArgs & args);
+		void draw();
+		void drawOutput(ofEventArgs & args);
+		void exit();
+
+		void outputKeyPressed(ofKeyEventArgs & args);
+
+		void keyPressed(ofKeyEventArgs &keyargs);
+		void keyReleased(int key);
+		void mouseMoved(int x, int y );
+		void mouseDragged(int x, int y, int button);
+		void mousePressed(int x, int y, int button);
+		void mouseReleased(int x, int y, int button);
+		void mouseEntered(int x, int y);
+		void mouseExited(int x, int y);
+		void windowResized(int w, int h);
+		void outputWindowResized(ofResizeEventArgs &resizeargs);
+		void dragEvent(ofDragInfo dragInfo);
+		void gotMessage(ofMessage msg);
+
+		ofPolyline polyLineTransform(const ofPolyline& poly, ofMatrix4x4 xform);
+
+		
+};