getting images from instagram

6 files changed, 231 insertions, 0 deletions

diff --git a/json-instagram/Makefile b/json-instagram/Makefile
new file mode 100644
index 0000000..cda22b7
--- /dev/null
+++ b/json-instagram/Makefile
@@ -0,0 +1,13 @@
+# Attempt to load a config.make file.
+# If none is found, project defaults in config.project.make will be used.
+ifneq ($(wildcard config.make),)
+	include config.make
+endif
+
+# make sure the the OF_ROOT location is defined
+ifndef OF_ROOT
+    OF_ROOT=../../openFrameworks
+endif
+
+# call the project makefile!
+include $(OF_ROOT)/libs/openFrameworksCompiled/project/makefileCommon/compile.project.mk
diff --git a/json-instagram/addons.make b/json-instagram/addons.make
new file mode 100644
index 0000000..ab5217b
--- /dev/null
+++ b/json-instagram/addons.make
@@ -0,0 +1 @@
+ofxJSON
diff --git a/json-instagram/config.make b/json-instagram/config.make
new file mode 100644
index 0000000..93c489d
--- /dev/null
+++ b/json-instagram/config.make
@@ -0,0 +1,141 @@
+################################################################################
+# CONFIGURE PROJECT MAKEFILE (optional)
+#   This file is where we make project specific configurations.
+################################################################################
+
+################################################################################
+# OF ROOT
+#   The location of your root openFrameworks installation
+#       (default) PATH_OF_ROOT = ../../.. 
+################################################################################
+# PATH_OF_ROOT = ../../..
+
+################################################################################
+# PROJECT ROOT
+#   The location of the project - a starting place for searching for files
+#       (default) PROJECT_ROOT = . (this directory)
+#    
+################################################################################
+# PROJECT_ROOT = .
+
+################################################################################
+# PROJECT SPECIFIC CHECKS
+#   This is a project defined section to create internal makefile flags to 
+#   conditionally enable or disable the addition of various features within 
+#   this makefile.  For instance, if you want to make changes based on whether
+#   GTK is installed, one might test that here and create a variable to check. 
+################################################################################
+# None
+
+################################################################################
+# PROJECT EXTERNAL SOURCE PATHS
+#   These are fully qualified paths that are not within the PROJECT_ROOT folder.
+#   Like source folders in the PROJECT_ROOT, these paths are subject to 
+#   exlclusion via the PROJECT_EXLCUSIONS list.
+#
+#     (default) PROJECT_EXTERNAL_SOURCE_PATHS = (blank) 
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_EXTERNAL_SOURCE_PATHS = 
+
+################################################################################
+# PROJECT EXCLUSIONS
+#   These makefiles assume that all folders in your current project directory 
+#   and any listed in the PROJECT_EXTERNAL_SOURCH_PATHS are are valid locations
+#   to look for source code. The any folders or files that match any of the 
+#   items in the PROJECT_EXCLUSIONS list below will be ignored.
+#
+#   Each item in the PROJECT_EXCLUSIONS list will be treated as a complete 
+#   string unless teh user adds a wildcard (%) operator to match subdirectories.
+#   GNU make only allows one wildcard for matching.  The second wildcard (%) is
+#   treated literally.
+#
+#      (default) PROJECT_EXCLUSIONS = (blank)
+#
+#		Will automatically exclude the following:
+#
+#			$(PROJECT_ROOT)/bin%
+#			$(PROJECT_ROOT)/obj%
+#			$(PROJECT_ROOT)/%.xcodeproj
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_EXCLUSIONS =
+
+################################################################################
+# PROJECT LINKER FLAGS
+#	These flags will be sent to the linker when compiling the executable.
+#
+#		(default) PROJECT_LDFLAGS = -Wl,-rpath=./libs
+#
+#   Note: Leave a leading space when adding list items with the += operator
+#
+# Currently, shared libraries that are needed are copied to the 
+# $(PROJECT_ROOT)/bin/libs directory.  The following LDFLAGS tell the linker to
+# add a runtime path to search for those shared libraries, since they aren't 
+# incorporated directly into the final executable application binary.
+################################################################################
+# PROJECT_LDFLAGS=-Wl,-rpath=./libs
+
+################################################################################
+# PROJECT DEFINES
+#   Create a space-delimited list of DEFINES. The list will be converted into 
+#   CFLAGS with the "-D" flag later in the makefile.
+#
+#		(default) PROJECT_DEFINES = (blank)
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_DEFINES = 
+
+################################################################################
+# PROJECT CFLAGS
+#   This is a list of fully qualified CFLAGS required when compiling for this 
+#   project.  These CFLAGS will be used IN ADDITION TO the PLATFORM_CFLAGS 
+#   defined in your platform specific core configuration files. These flags are
+#   presented to the compiler BEFORE the PROJECT_OPTIMIZATION_CFLAGS below. 
+#
+#		(default) PROJECT_CFLAGS = (blank)
+#
+#   Note: Before adding PROJECT_CFLAGS, note that the PLATFORM_CFLAGS defined in 
+#   your platform specific configuration file will be applied by default and 
+#   further flags here may not be needed.
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_CFLAGS = 
+
+################################################################################
+# PROJECT OPTIMIZATION CFLAGS
+#   These are lists of CFLAGS that are target-specific.  While any flags could 
+#   be conditionally added, they are usually limited to optimization flags. 
+#   These flags are added BEFORE the PROJECT_CFLAGS.
+#
+#   PROJECT_OPTIMIZATION_CFLAGS_RELEASE flags are only applied to RELEASE targets.
+#
+#		(default) PROJECT_OPTIMIZATION_CFLAGS_RELEASE = (blank)
+#
+#   PROJECT_OPTIMIZATION_CFLAGS_DEBUG flags are only applied to DEBUG targets.
+#
+#		(default) PROJECT_OPTIMIZATION_CFLAGS_DEBUG = (blank)
+#
+#   Note: Before adding PROJECT_OPTIMIZATION_CFLAGS, please note that the 
+#   PLATFORM_OPTIMIZATION_CFLAGS defined in your platform specific configuration 
+#   file will be applied by default and further optimization flags here may not 
+#   be needed.
+#
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_OPTIMIZATION_CFLAGS_RELEASE = 
+# PROJECT_OPTIMIZATION_CFLAGS_DEBUG = 
+
+################################################################################
+# PROJECT COMPILERS
+#   Custom compilers can be set for CC and CXX
+#		(default) PROJECT_CXX = (blank)
+#		(default) PROJECT_CC = (blank)
+#   Note: Leave a leading space when adding list items with the += operator
+################################################################################
+# PROJECT_CXX = 
+# PROJECT_CC = 
diff --git a/json-instagram/src/exampleApp.cpp b/json-instagram/src/exampleApp.cpp
new file mode 100644
index 0000000..0559dce
--- /dev/null
+++ b/json-instagram/src/exampleApp.cpp
@@ -0,0 +1,55 @@
+#include "exampleApp.h"
+
+/*
+so far so good, NOW
+
+threading
+
+parse response and identify new pictures
+save pictures & metadata - rather than reloading each time?
+local images format
+do we need any metadata? I guess not other than to know the tag id
+could save with the tag id as the name of file, simpler
+
+how exactly do we parse or mipmap the images
+do we worry about memory - I guess not
+
+*/
+
+//------------------------------------------------------------------------------
+void exampleApp::setup()
+{
+	ofSetFrameRate(24);
+	
+	std::string url = "https://api.instagram.com/v1/tags/tycleeson/media/recent?client_id=c1d74d701fdf4ddd9f8d30ee9e8f944b";
+
+	if (!response.open(url)) {
+		cout  << "Failed to parse JSON\n" << endl;
+	}
+	//else cout<<response.getRawString()<<endl;
+
+	
+	int numImages = MIN(5,response["data"].size());
+	for(int i=0; i< numImages; i++) {
+		std::string url = response["data"][i]["images"]["standard_resolution"]["url"].asString();
+		std::string id = response["data"][i]["caption"]["id"].asString();
+		cout<<"fetching "<<id<<":"<<url<<endl;
+
+		
+		ofImage img;
+		img.loadImage(url);
+		images.push_back( img );
+	}
+	
+	
+}
+
+//------------------------------------------------------------------------------
+void exampleApp::draw()
+{
+	ofBackground(0);
+    
+	for(int i=0; i<images.size(); i++) {
+		images[i].draw(i*30, i*30);
+	}
+}
diff --git a/json-instagram/src/exampleApp.h b/json-instagram/src/exampleApp.h
new file mode 100644
index 0000000..1dcb032
--- /dev/null
+++ b/json-instagram/src/exampleApp.h
@@ -0,0 +1,15 @@
+#pragma once
+
+
+#include "ofMain.h"
+#include "ofxJSONElement.h"
+
+
+class exampleApp : public ofBaseApp {
+public:
+    void setup();
+    void draw();
+    
+    ofxJSONElement  response;
+    std::vector<ofImage> images;
+};
diff --git a/json-instagram/src/main.cpp b/json-instagram/src/main.cpp
new file mode 100644
index 0000000..1c07795
--- /dev/null
+++ b/json-instagram/src/main.cpp
@@ -0,0 +1,6 @@
+#include "exampleApp.h"
+
+int main() {
+	ofSetupOpenGL(800,700,OF_WINDOW);
+	ofRunApp(new exampleApp());
+}